SFP-GQS-SPO400-ER4C
LYCOM’s 40GE QSFP+ ER4 40km Optical Transceiver modules are designed for using in 40 Gigabit Ethernet and 4X10G OTN client interfaces over single mode fiber. They are compliant with the QSFP+ MSA, IEEE 802.3bm 40GBASE-ER4, and OTU3 requirements. The LYCOM technology enables the integration of 4 transmitters, 4 receivers and an optical MUX/DeMUX into a small form factor packag.
SFP-GQS-SPO400-ER4C
Hot-pluggable QSFP form factor
Supports 39.8 Gb/s to 44.6 Gb/s
18.5 dB link insertion loss budget
Single 3.3V power supply
Maximum link length of 40km on Single Mode Fiber (SMF)
Uncooled 4x10Gb/s CWDM transmitter
XLPPI electrical interface
Duplex LC receptacles
Operating case temperature range: 0 to 70°C
3.5W maximum power dissipation
RoHS-6 compliant (lead free)
Pin Descriptions
| Pin |
Logic |
Symbol |
Name/Description |
| 1 |
|
GND |
Module Ground1 |
| 2 |
CML-I |
Tx2- |
Transmitter inverted data input |
| 3 |
CML-I |
Tx2+ |
Transmitter non-inverted data input |
| 4 |
|
GND |
Module Ground1 |
| 5 |
CML-I |
Tx4- |
Transmitter inverted data input |
| 6 |
CML-I |
Tx4+ |
Transmitter non-inverted data input |
| 7 |
|
GND |
Module Ground1 |
| 8 |
LVTTL-I |
MODSEIL |
Module Select2 |
| 9 |
LVTTL-I |
ResetL |
Module Reset2 |
| 10 |
|
VCCRx |
+3.3V Receiver Power Supply |
| 11 |
LVCMOS-I |
SCL |
2-wire Serial interface clock2 |
| 12 |
LVCMOS-I/O |
SDA |
2-wire Serial interface data2 |
| 13 |
|
GND |
Module Ground1 |
| 14 |
CML-O |
RX3+ |
Receiver non-inverted data output |
| 15 |
CML-O |
RX3- |
Receiver inverted data output |
| 16 |
|
GND |
Module Ground1 |
| 17 |
CML-O |
RX1+ |
Receiver non-inverted data output |
| 18 |
CML-O |
RX1- |
Receiver inverted data output |
| 19 |
|
GND |
Module Ground1 |
| 20 |
|
GND |
Module Ground1 |
| 21 |
CML-O |
RX2- |
Receiver inverted data output |
| 22 |
CML-O |
RX2+ |
Receiver non-inverted data output |
| 23 |
|
GND |
Module Ground1 |
| 24 |
CML-O |
RX4- |
Receiver inverted data output |
| 25 |
CML-O |
RX4+ |
Receiver non-inverted data output |
| 26 |
|
GND |
Module Ground1 |
| 27 |
LVTTL-O |
ModPrsL |
Module Present, internal pulled down to GND |
| 28 |
LVTTL-O |
IntL |
Interrupt output, should be pulled up on host board2 |
| 29 |
|
VCCTx |
+3.3V Transmitter Power Supply |
| 30 |
|
VCC1 |
+3.3V Power Supply |
| 31 |
LVTTL-I |
LPMode |
Low Power Mode2 |
| 32 |
|
GND |
Module Ground1 |
| 33 |
CML-I |
Tx3+ |
Transmitter non-inverted data input |
| 34 |
CML-I |
Tx3- |
Transmitter inverted data input |
| 35 |
|
GND |
Module Ground1 |
| 36 |
CML-I |
Tx1+ |
Transmitter non-inverted data input |
| 37 |
CML-I |
Tx1- |
Transmitter inverted data input |
| 38 |
|
GND |
Module Ground1 |
Note:
1. Module circuit ground is isolated from module chassis ground within the module.
2. Open collector should be pulled up with 4.7K to 10K ohms on host board to a voltage between 3.15V and 3.6V.
Ordering Information:
| Part Number |
Product Description |
| SFP-GQS-SPO400-ER4C |
40GE/OTU3 QSFP ER4, 40km on single-mode fiber |
